SynFlex Group:
SHWire
(loading)
Language
Please tell us
Winding wire

SHBond® WD210

  • selfbonding enamelled round cu.wire, bondable
  • insulated with theic-mod. polyesterimide
  • plus Amide-Imide overcoat
  • plus bonding layer aromatic polyamide
  • class 200
Attributes

"SHBond® WD210" is a highly thermo-resistant self-bonding enamelled copper wire of heat performance class N. With this wire the excellent resistance and insulation properties of SHTherm® 210 - Dualcoat are combined with the special application possibilities of an additional bonding layer which is based on mod. aromat. Polyamide and which enables the production of heat bonded wire windings. Using this type of thermo-setting wire the heat bonding process is economic, as it can be executed within seconds and can support automatic processing. It is not harmful to the environment. Heat bonded windings show excellent thermal and mechanical stability and high resistance to climatic demands and many chemical agents. Sophisticated process technology and process setting ensure easy mouldability, good elongation and excellent insulation properties.

Application

Drives for household appliances, pole windings, wire wound coils, power tools

Standards

IEC / DIN EN 60317-38
NEMA MW 102-C
UL approved

Delivery forms

Grade 1: 0.250 - 1.000 mm
Grade 2: 0.300 - 1.000 mm
(> 1.250 mm on request)

Technical data

Typical properties of enamelled round copper wire 0.500 mm, with insulation film grade 1B

Mechanical
Outer diameter with varnish  Bare wire diameter  Elongation and adhesion  Scrape resistance  Pencil hardness of varnish  Elongation at break  Coefficient of friction 
Unit of measure Set value  Actual value (typ.) 
mm  min. 0.541 - max. 0.568 as set value
mm  0.495-0.505 as set value
  mandrel diamter: 0.500 mm 1 x d / 10% pre-elongation
≥ 3.950 ≥ 7.500
  H 3H / 5H
≥ 28 ≥ 38
µ  / ≤ 0.140
Thermal
Temperature index TI  Cut through temperature (pre-heated block)  Dielectric loss factor (bending point)  Heat shock at 220 °C (no cracks in varnish coat after winding)  Bonding temperature 
Unit of measure Set value  Actual value (typ.) 
  200 210
°C  320 ≥ 360
(°C) (tan δ)  / ≥140/180/240
  mandrel diameter 1.120 mm 1 x d / 10% pre-elongation
°C  200 +/- 2 ≥ 180
Electrical
Dielectric strength RT  High voltage discontiniuties 750V  Electrical conductivity 
Unit of measure Set value  Actual value (typ.) 
kV  ≥ 2.4 (twist) ≥ 3 (cylinder)
  ≤ 10 on 30 m ≤ 7 on 100 m
MS/m  58 - 59 ≥ 58.5
Chemical
Pencil hardness (storage in standard solvent ½ h / 60 °C)  Pencil hardness (storage in alcohol ½ h / 60 °C)  Resistance to commercial impregnants^(1)  Resistance to commercial refrigerants^(1)  Resistant to dry transformer oils^(1)  Resistance to hydraulic oils^(1) 
Set value  Actual value (typ.) 
test methods unsuitable /
test methods unsuitable /
/ not applicabled
/ limited
/ not recommended
/ no

(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used.